| PUE
7 measuring indicator |
 |
 |
|
PUE 7 weighing indicator is intended
for constructing industrial scales.
It is offered in a plastic or stainless steel casing
for panel version installation. It features 5.7”
colour graphic display with touch panel and membrane
keypad. Two proximity detectors
with programmable functionality offer hands-free operation.
The following peripherals can be connected to PUE 7: barcode scanners,
receipt and label printers, transponder card readers and typical PC equipment
(keybord, mouse etc.). PUE 7 supports 1 weighing platform
in standard version and up to 4 platforms, optionally (PUE7/P).
Software versions:
• standard (labeling, parts counting, percent setup functions),
• single stand PGC (prepacked goods control),
• mass comparator,
• PGC network,
• vibrant batcher.
 |
|
 |
|
Infrared proximity sensors
Optional functions:
- PRINT function
- TARE function
- sensor's sensitivity adjustment
|
|
Interface
communication
- Ethernet
- 2×RS 232
- 2×USB
- 4in/4out |
|
|
|
|
| |
| Technical data: |
PUE 7 |
PUE 7P |
| Housing |
plastic |
stainless steel |
| IP rating |
IP 54 |
front IP 66/67, construction
IP 32 |
| Proximity sensors |
2 |
- |
| Power supply |
120÷230VAC; 10÷15VDC |
10÷15VDC |
| Display |
5,7" with
touch panel |
| Keypad |
8 keys |
| Operation Temperature |
-10°C
÷ 40°C |
| OIML class |
III |
| Maximum number of verification intervals |
6 000 |
| Maximum input signal increase |
19,5 mV |
| Maximum voltage per verification interval |
3,25 µV |
| Minimum voltage per verification
interval |
0,5 µV |
| Minimum tensometer impedance |
80  |
| Maximum tensometer impedance |
1200 |
| Tensometer bridge excitation voltage |
5 V |
| Processor |
ARM 200 MHz |
| Memory |
RAM 64 MB,
Flash 1 GB |
| Operation System |
Windows CE
6.0 |
| Number of platforms |
2 |
4 |
| Additional weighing platform module |
Metrological
parameters as in main platform (option) |
| Interfaces |
2×RS
232, 2×USB, Ethernet, 4in / 4out |
|
|
